1.4m 1.75m Poultry Manure Belt System Automatic Manure Removal System for H-Type Poultry Cages Chicken Manure Conveyor Belt

Our 1.4m & 1.75m automatic poultry manure belt system is engineered to match H-type chicken cages. This automated manure removal solution works for chickens, quails and ducks. It adopts polypropylene manure conveyor belts to continuously clear manure inside poultry houses, cutting labor input and reducing disease risks. Available belt widths cover multiple specifications to fit A-type and H-type cage systems for commercial poultry farms.

• 1.4m automatic poultry manure belt system
• 1.75m automatic poultry manure belt system
• Dual optional manure collection modes: belt type or scraper type

Keywords: Poultry Manure Belt System

This poultry manure removal conveyor system serves multi-species breeding, supporting chicken, quail and duck manure cleaning. The full series includes PP manure belts, manure conveyor belts and automatic dung removal assemblies for commercial poultry housing.

1. The primary manure conveyor belt is made of thickened PP material, featuring outstanding corrosion resistance and strong environmental adaptability for long-term use. It presents low abrasion during manure conveying and can serve 10–20 years. Its load capacity reaches 5000N per square meter to bear heavy loads steadily.
2. The driving motor for the manure conveyor is equipped with a cycloidal reducer; multi-tier cage configurations can be fitted with spur gear reducers as an alternative.
3. The scraper blade adopts high-carbon steel or heavy-gauge galvanized steel. It can withstand impact from hard debris without deformation, with precise craftsmanship for stable scraping performance.
4. High operation efficiency enables timely automatic manure transportation out of the chicken house. It prevents overnight manure accumulation that may trigger bacterial and infectious diseases. Automatic feeding linkage is supported, and manure conveying height can be adjusted flexibly according to on-site conditions.

• Side plate: 3mm hot-dip galvanized steel
• Safety chain door: 1mm hot-dip galvanized steel / zinc-aluminum alloy
• Running speed: 3 m/min
• Main motor: 1.5 kW
• PP manure belt: 1.2mm thickness, high tensile strength for extended service life; available widths: 1m, 1.2m, 1.25m, 1.4m, 1.5m, 1.75m, 1.8m, 2.1m
• Support bracket: 1.5mm hot-dip galvanized steel
• Passive roller: front-mounted spiral cylinder, equipped with anti-deviation mechanism
• Transverse manure conveyor: 1 set per poultry house; separate horizontal & inclined conveying structure, hot-dip galvanized construction
• Cross conveying belt: 8mm green rubber belt, power 3 kW; zero manure leakage during transfer

1. The chicken house floor must be hardened and level, free of bumps and depressions. The longitudinal slope shall not exceed 2 degrees. The far side of the manure area needs a 5–10° downward gradient to guarantee smooth water drainage.
2. Align the cages in a straight line. Adjust the foot regulators to control height deviation between adjacent cages within 0.5 mm, and the spacing deviation of support legs shall also stay under 0.5 mm.
3. Secure the main drive unit, headstock and tailstock firmly onto the ground to eliminate loosening risks.
4. Mount the manure belt or scraper assembly, then verify the matching clearance between manure belt and baffle plates.
5. Professional electricians shall complete wiring and control circuit installation. Locate and fasten the travel switch properly.
6. The control cabinet must be fitted with earth leakage protection.
7. Conduct trial operation via inching mode on the control panel. Multiple staff members should cooperate for inspection. Check for belt scratching, jamming or deviation. Troubleshoot any defects before formal startup.
8. Acceptance standard: stable operation, uniform manure discharge, noise below 40 decibels and minimal vibration. The equipment is qualified when all indicators meet requirements.