2-3rows Poultry Manure Removal System For Livestock Farming SONCAP Listed

    Mechanical Manure Cleaning Collecting Machine Automated Livestock Poultry Equipment

Mechanical Manure Cleaning Collecting Machine Introduction

Mechanical manure cleaning or collecting machine for automated livestock poultry equipment chicken cages include scraper manure removal and pp belt manure removal equipments. 

scraper type manure collection machines is designed for A frame cage systems which has manure pits under the cages, the waste dropping from the cages into manure pits, and the scraper can collect the manure from the manure pits to the outside of  chicken house. Each machine is used for 2 to 3 rows of chicken cages manure pit. The width of the manure scraper is designed according to the customers’ manure pit size.

Chicken cage conveyor belt type manure cleaner is a kind of automatic manure removal equipment in poultry farms. The type of manure cleaner is suitable for H type chicken cage poultry farms. It has the advantages of clean manure removal and high efficiency. 

Manure Collecting Machine Installation Precautions

1. It is required that the chicken house must be hardened, the ground is flat, there is no convexity and concave place, the slope control should not exceed 2 degrees up and down. The excrement should be 5-10 degrees lower on the other side. So that the water can be drained smoothly.

2. Place the chicken cages straight and adjust the foot adjuster so that the height deviation between the two cages should not exceed 0.5 mm, and the distance between the legs should not exceed 0.5 mm.

3. Main engine should be firmly fixed, also the head and tailstock should be firmly fixed to the ground without loosening.

4. Install manure belt or scraper, and check whether the manure belt and the manure baffle are suitable.

5. The electrician installs the wiring and control line, and finds the position of the travel switch, and fixes it firmly;

6. The controller must contain a leakage protection device;

7. The test running is performed by a person on the control panel in a jog mode, and multiple persons should cooperate to ensure that there are no scratches, jams, deflection, etc. in the equipment. If problems are found, find out the reasons and solve them in time. Start and run when it is confirmed that there is no error;

8. If the operation is stable, the manure removal is uniform and there is no too much noise (less than 40 decibels). There is not much jitter. That is qualified.

Mechanical Manure Collecting Machine Characteristics